Certified SOLIDWORKS Professional: Free Mock Test & Practice Questions

Certified SOLIDWORKS Professional

This exam is for experienced SOLIDWORKS users who want to prove their ability to design and analyze parametric parts and movable assemblies. Passing demonstrates a professional-level competency in SOLIDWORKS, often sought by employers for advanced design roles.

Pass mark 165/14 205 minutes Real test fee 99 USD Dassault Systèmes (SOLIDWORKS) How many can I get wrong?

Little and often beats one big session. Five minutes on the bus counts.

Free practice questions

Try 3 real Certified SOLIDWORKS Professional questions

Have a go, then reveal the worked explanation. A taster from a bank of 209 original questions — unlock for unlimited drills and full timed mocks.

Q1. In a SOLIDWORKS sketch, what does the color black indicate for a sketch entity?

A. The entity is under defined and can move freely.
B. The entity is fully defined and its position is fixed.
C. The entity is part of a block.
D. The entity has a conflicting or redundant relation.

Show answer & explanation

✓ Answer: B. The entity is fully defined and its position is fixed.

Black entities are fully constrained by dimensions and relations, which is the desired state for robust and predictable models.

Q2. In the Hole Wizard, when creating a Counterbore hole with a 'Through All' end condition, what does this condition apply to?

A. The counterbore diameter's depth
B. Both the counterbore and the main hole
C. Only the main (thru-hole) diameter
D. The fastener's head clearance

Show answer & explanation

✓ Answer: C. Only the main (thru-hole) diameter

The 'Through All' end condition specifically applies to the primary hole, while the counterbore depth is defined as a separate, blind value.

Q3. You are modifying a part where a hole's diameter must always be half the part's overall width. The width is controlled by a dimension named "Width@Sketch1". How would you correctly link the hole's diameter dimension using the Equations dialog box?

A. LINK("Width@Sketch1", 0.5)
B. Width@Sketch1 * 0.5
C. EVALUATE("Width@Sketch1" / 2)
D. ="Width@Sketch1" / 2

Show answer & explanation

✓ Answer: D. ="Width@Sketch1" / 2

In the Equations dialog, you must start with an equals sign and enclose the full dimension name in quotes to create the link.

Start here

Ten questions to see where you stand

Two minutes, no timer, marked the moment you finish with every answer explained. Then you'll know which topics need the work before you sit a full mock.

Exam mode

Full mock exam

14 random questions, real timing, marked against the official pass mark. Different every time.

Create a free account for a full mock

No card needed. A free account unlocks a full timed mock and 3 drills on every exam.

Try it free

Topic drills

Ten quick questions on one topic, marked instantly with explanations.

1 free drill left — then a free account unlocks 3 + a full mock.

Certified SOLIDWORKS Professional — common questions

Frequently asked

How many questions are in the Certified SOLIDWORKS Professional?

The exam has 14 questions. Every Revision Robin mock uses the same 14-question format so your practice matches the real thing.

What is the pass mark for the Certified SOLIDWORKS Professional?

You need 165 out of 14 correct to pass, which is about 1179%. Our mocks mark you against this exact threshold.

How long do you get?

The test is timed at 205 minutes. Our full mock runs on the same clock so you can practise your pacing.

Are these the real exam questions?

No. Our questions are original and written to match the current syllabus, so they give realistic practice without copying the official paper. Every answer comes with a plain-English explanation. Always confirm current rules and content with Dassault Systèmes (SOLIDWORKS).

How much does the official test cost?

The official Dassault Systèmes (SOLIDWORKS) fee is 99 USD. Revision Robin practice is separate and helps you pass first time so you only pay that fee once.